SCS 3342/3365

SCS/Frigette Electronic Cruise Control with Vacuum Servo for many Import, Ford, Mopar, GM  vehicles.

Will NOT fit vehicles with Electronic Throttles. 
See "Electronic Throttle Cruise" Category under the Cruise Control heading

Handle is Included ! One of the 6 handles of your choice, in the picture below, is included unless you choose an upgrade to the optional wheel switches or optional GM control arms.

Add-on Speed Signal Devices for older GM models are extra, $40 for the GM 208-3606.
Call or Email for GM vehicles between 1982-1987 as some have a VSS, some need the 208-3606. 
Before 1982 all GM vehicles will require the 208-3606

SAFETY FEATURES click theis link to read all the safety features.



IMPORTANT NOTICE: Our Price includes the Control handle and the Tech tips / Wiring locations for YOUR Vehicle.
We are also a STOCKING Warehouse Distributor. 
We ship the same day. 
If you’ve shopped JC WHITNEY you will notice they are charging $40.00 MORE as well as delaying shipment for 7-10 days by having it drop shipped from the MFG.






The DASH SWITCH is BACK ORDERED at this Time.


The DASH SWITCH is BACK ORDERED at this Time.

Works with nearly all newer cars and trucks, However, Some newer vehicles have higher pulse rate VSS that this cruise cannot recognize properly. 
The Electric Cruise (4342/4365) is capable of handling those newer vehicles.
 If your vehicle must have the Electric cruise we will advise you before processing the order.

See list below for The Models that must use the 4342/4365 Electric cruise.

1998-up Metro 1.0L, 
2003-up Chrysler Caravan, 
2003-up PT Cruiser,  
2002-up Intrepid,  
2002-up Neon , 
2003-up Ram Van, 
2003-up Dodge Trucks, 
2003-up Dodge Dakotas, 
All other Dodge Chrysler products 2003 and newer, 
1999-up Ford Windstar, 
2005-up Ford Escape, 
2004-up Ford Freestar, 
2002-up Isuzu Rodeo, 
2000-up Saturn S series, 
2003-up Saturn ION

There are NO Cruise Controls for 1995 and up POWERSTROKE Diesel Ford Trucks or
any year Volkswagon Vanagans

The handle Most often used is the 3rd one from the Top in the Handles picture. 
We recommend the # 3 handle on most every installation that doesn’t use the # 2 , # 4 or # 5 direct replacement handles.
The Dash switch is available and can substituted at no extra charge. 
Or if you wish, We will include The correct handle for your application. 
Optional Wheel mounted switches are available @ an additional $60

Also Included, Instructions for installation on your vehicle. 
We are an Installing Dealer, So we include the Tech Tips and Installers Notes to make your installation easier.
 
Below is a Link to request the Electric servo cruise PDF instructions. 
Request for PDF of Instructions of 3342

Wiring connections to your vehicle are as follows
12 volts: that is ON / OFF with the ignition normally found at the fusebox.
Ground: 
Brake light Switch: Two wires connect there. Constant 12 volts and the lamp side of the switch.
VSS: We give you the location, wire color, pin number etc to easily find that connection

SAFETY FEATURES


The DASH SWITCH is BACK ORDERED at this Time.

Handle #1 Fits well on 1995 and newer GM products that have the plastic housing around the steering column, it is an ADDED arm, nothing is replaced or altered that already exists.

Handle #2 Fits Early 1980’s through 1994 GM products that have a round metal steering column and the PULL-OUT handle.

Handle #3 Fits all universal applications on Import and Domestic vehicles.  It is an ADDED Arm that bolts through the plastic housing surrounding the steering column. Nothing is replaced or altered that exists now on your vehicle, it is an ADDED arm.

Handle #4 is for older Chrome stem turnsignal only turnsignal arms. The existing Chrome shaft is cut off and this handle slides over and has set screws to hold it tight.

Handle #5 Fits older GM cars and trucks that use a single screw to hold the turnsignal arm to the cam inside the column. Fits from the 60’s to the early 80’s that utilize the single screw mounting.
FITS most ALL Motorhomes with GM chassis

DASH Switch For those who want a dash switch, it is 2.25" x 1" x 3/4" thick. BACKORDERED

Wheel Switches ($60 extra) Choose the style that fits best. Will Not Fit Ford Trucks nor replace any Factory switches. Dimensions are 2.13" long x .75" tall x 1.35" deep